Product
Ingersoll Rand 54672530 Air Filter Element | N55/N75 Screw Compressor Intake
Genuine Ingersoll Rand 54672530 air filter element for N55/N75 screw compressors. 247 mm OD, 365 mm height, 5–10 μm filtration, glass-fiber media with low pressure drop and high dust holding. Cross-reference SA17281; matched by serial number.
- Export packaging & documentation support
- OEM / ODM customization available
- Sample and bulk order workflow
Product Overview
The Ingersoll Rand 54672530 air filter element is a genuine intake filter engineered for N55 and N75 series screw air compressors. Its high-efficiency synthetic/glass-fiber media captures airborne dust and particulate before it reaches the screw airend, helping protect rotors, bearings and shaft seals from abrasive wear and extending compressor service life.
The 54672530 is a large cylindrical pleated element measuring approximately 247 mm outside diameter and 365 mm overall height, finished with a red polyurethane end-cap gasket. It also cross-references several Atlas Copco part numbers and the HiFi Filter SA17281.
Key Specifications
- Part number: 54672530
- Brand: Ingersoll Rand
- Component: Air filter element / intake filter
- Machine compatibility: N55, N75 screw compressors
- Cross-reference: HiFi SA 17281
- Outside diameter: 247 mm
- Inside diameter: 150 mm
- Overall height: 365 mm
- Weight: approx. 5 kg
- Filtration rating: 5–10 μm
- Filtration efficiency: approx. 99% @ 10 μm
- Filter class: F7–F8 (per EN 779 / ISO 16890)
- Dust holding capacity: approx. 1.0–1.5 kg
- Beta ratio: β₁₀ ≥ 1000
- Rated air flow: approx. 10–13 Nm³/min (for 55–75 kW models)
- Initial pressure drop: approx. 250–350 Pa at rated flow, clean
- Operating differential pressure: 350–600 Pa
- Alarm / final resistance: alarm at 700 Pa; replace at 900 Pa
- Media: synthetic / glass-fiber, yellow filter paper
- Media weight: approx. 120–150 g/m²
- Support: galvanized expanded metal mesh, inner and outer
- End cap: red polyurethane (PU)
- Seal: red NBR gasket, one upper and one lower
- Operating temperature: −20 °C to +80 °C continuous; 100 °C short-term
- Relative humidity: ≤95% RH, non-condensing
- Collapse pressure resistance: ≥4.0 kPa
- Service life: approx. 4,000 hours (8–12 months) under standard conditions; 2,000–3,000 hours in high-dust environments
- Shelf life: 36 months in original sealed packaging, dry ambient conditions
Standards & Compliance
- ISO 5011 — inlet air filter performance testing for internal combustion engines and compressors
- ISO 16890 / EN 779 — general ventilation air filter classification
- GB/T 14295 — air filters
- GB/T 6165 — air filter performance test methods
Installation & Maintenance
Replacement interval: every 4,000 hours or 8–12 months under standard conditions, whichever comes first. In high-dust environments, reduce to 2,000–3,000 hours. Replace immediately if the media turns black, shows heavy dust loading, or if differential pressure reaches 900 Pa.
- Lock out / tag out: switch off the compressor main power and confirm the unit has fully stopped.
- Open the filter housing: release the retaining bolts or clamps and remove the cover.
- Remove the old element: pull out the used 54672530 and check whether the old gasket remains in the housing groove.
- Clean the housing: wipe the inner walls and sealing surface with a clean cloth to remove dust and debris.
- Inspect the new element: verify part number 54672530; check media for damage, end caps for cracks, and the red gasket for ageing.
- Install: seat the new element vertically in the housing center, ensuring both upper and lower gaskets contact correctly with no misalignment.
- Refit the cover: reinstall and tighten bolts or clamps evenly.
- Start-up check: run the compressor and listen for air leaks at the filter housing.
Related Part Numbers
- SA 17281 — HiFi air filter element (cross-reference for 54672530)
- 1613950100 — Atlas Copco air filter element (compatible cross-reference)
- 1613951000 — Atlas Copco air filter element (compatible cross-reference)
- 1631043700 — Atlas Copco air filter element (compatible cross-reference)
- 2255300129 — Atlas Copco air filter element (compatible cross-reference)
- 88111901 — Air filter element for SSR M37/M45 models
FAQ
Q: Is the 54672530 a genuine Ingersoll Rand part?
A: Yes, it is a genuine Ingersoll Rand component with yellow high-efficiency media and a red polyurethane end-cap gasket, designed for N55/N75 screw compressors.
Q: Which machines does the 54672530 fit?
A: It fits Ingersoll Rand N55 and N75 series screw compressors. If you are unsure, provide the machine serial number and we will confirm.
Q: What is the cross-reference for the 54672530?
A: The HiFi Filter SA 17281. It also cross-references Atlas Copco part numbers 1613950100, 1613951000, 1631043700 and 2255300129.
Q: What are the dimensions?
A: Approximately 247 mm outside diameter, 150 mm inside diameter, 365 mm overall height, and about 5 kg.
Q: How do I know when to replace the air filter element?
A: Replace when the media is visibly black or heavily loaded, when operating differential pressure reaches the 700 Pa alarm point, or when the 4,000-hour / 8–12 month interval is reached.
For 100% accurate matching, please provide the complete compressor serial number. We will check the original parts diagram and confirm current availability. Request a quotation or datasheet for export orders.